You're currently on:
Chevelle & Malibu Exhaust Parts and Exhaust Systems for 'All Years and Models'
When it's time to repair, replace, or rebuild your Chevelle & Malibu exhaust system, Eckler's Chevelle is the number one place to go. Eckler's Chevelle has a huge variety of Chevelle & Malibu stock exhaust systems, Chevelle & Malibu performance exhaust systems, and Chevelle & Malibu exhaust parts for your car. There's no better place in the nation to shop for Chevelle & Malibu exhaust system parts.
| Items 1 to 28 of 71 total | Page: | Show per page |
| View as: Grid List | Sort by |
Best Sellers
Thermo-Tec Hi-Heat Exhaust Wrap Coating, Aluminum Part # 88-0175-1
Will Also Work On Metal Surfaces Seals Pores To Minimize Penetration Of Harmful Liquids 11 Oz. Spray Can Learn More
$12.99 ea.
Insulating Exhaust Wrap Part # 88-0173-1
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe. Learn More
$51.99 rl.
Chevelle Dual Exhaust Tips, Big Block, Chrome, 1969-1972 Part # 604100
Good Quality Reproduction Styled After The GM Original Exhaust Tip Chrome Plated Highly Polished Sold As A Pair Learn More
$49.99 pr.
Calyx Exhaust Manifold Dressing Part # 88-0260-3
To keep your cast iron exhaust manifolds looking concours prepared perfect, use Calyx Manifold Dressing. It applies with a flannel cloth and polishes to a silver shine in seconds. After the manifold is prepared with calyx, apply when necessary, very little upkeep is required. Application of the dressing does not require removal of the manifolds. Calyx Manifold Dressing will not burn and is non-toxic. One container, 3 ounces, will do 3 sets of cast iron exhaust manifolds. Learn More
$18.99 ea.
Exhaust Wrap, Stainless Steel Locking Ties Part # 88-0174-1
Cut-To-Length Narrow To Fit In Tight Locations Easy Slide-Through Fasteners To secure your Exhaust Wrap use, Stainless Steel Locking Ties. For primary tubes use 9-inch, for collectors use 18-inch. The ties can be used anywhere there is extreme heat (up to 2500° F). Learn More
$34.99 Kit
Regular Price: $0.99 ea.
Sale Price: $0.71 ea.
Chevelle Dual Exhaust Hanger Kit, Small Or Big Block, 1968-1972 Part # 630431
2 Muffler Hangers Left And Right 2 Tailpipe Hangers Left And Right 8 Exhaust Clamps 8 Thread Cutting Hex Head Screws This Chevelle reproduction exhaust hanger kit has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction exhaust hanger kit from Eckler's will add authenticity and value to your Chevelle. Learn More
$59.99 Kit
Regular Price: $0.99 ea.
Sale Price: $0.71 ea.
Chevelle Exhaust System, Dual, Big Block, With Resonators, For Cars With Original Exhaust Manifolds, 1970-1972 Part # 630430
Reproduction Of Original Aluminized For Maximum Life Span Fits Cars With Original Exhaust Manifolds (No Headers) Includes Exhaust Pipes & Mufflers Requires Exhaust Hanger Kit P/N 630431 This Chevelle reproduction aluminized exhaust system has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction aluminized exhaust system from Eckler's will add authenticity and value to your Chevelle. Learn More
$439.99 Kit
Chevelle Exhaust Manifolds, Big Block, Without Smog Fittings, 1967-1968 Part # 631584
Excellent reproduction exhaust manifolds with casting numbers (LH 3909879, RH 3916178). Fits all 1967-70 Big Blocks Learn More
$349.99 pr.
Chevelle Exhaust Manifold Bolts & Washers, Small Block, 1967-1972 Part # 604380
Reproductions Of Original 32-Piece Set Includes 12 Bolts & 12 Special Thick Washers Features Double Ring Headmarks These Chevelle reproduction exhaust manifold bolts have been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using reproduction exhaust manifold bolts from Eckler's will add authenticity and value to your Chevelle. Learn More
$24.99 Set
Chevelle Exhaust System, Dual, Big Block, Without Resonators, For Cars With Original Exhaust Manifolds, 1968-1972 Part # 630429
Reproduction Of Original Aluminized For Maximum Life Span Fits Cars With Original Exhaust Manifolds (No Headers) Includes Exhaust Pipes & Mufflers Requires Mounting Kit P/N 630431 This Chevelle reproduction aluminized exhaust system has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction aluminized exhaust system from Eckler's will add authenticity and value to your Chevelle. Learn More
$374.99 Kit
Chevelle Exhaust Manifold Bolts & Washers, Small Block, 1964-1966 Part # 602261
Correct reproduction double circle head marking. Black oil finish bolts as original. Complete set with correct thick flat washers. For small blocks. Learn More
$23.99 Set
Chevelle Exhaust System, Dual, 2.5", Aluminized American Thunder, For Cars With Headers, Flowmaster, 1964-1972 Part # 608239
Mandrel Bent, 2.5" 16ga Aluminized Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers And Hardware For Easy Installation Header Back System Dyno Tuned for Maximum Performance Learn More
$489.99 Kit
Chevelle Intake Manifold Bolts, Big Block, For Cars With Aluminum Intake Manifold, 1966-1969 Part # 604383
Technically correct US made faithful reproduction intake manifold bolt set with correct head markings and plating. Learn More
$31.99 Set
Chevelle Exhaust Manifold Bolts & Washers, Big Block, 1965-1967 Part # 604379
Reproductions Of Original 32-Piece Set Includes 16 Bolts & 16 Special Thick Washers Features Correct Headmarks These Chevelle reproduction exhaust manifold bolts have been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using reproduction exhaust manifold bolts from Eckler's will add authenticity and value to your Chevelle. Learn More
$29.99 Set
Chevelle Exhaust Heat Riser Gasket, Flat 2.5", 1964-1983 Part # 654066
Replacement Gasket For 2.5" Exhaust Manifolds Learn More
$4.99 ea.
Thermo-Tec Insulating Wrap, Graphite Black Part # 88-1349-3
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe. Learn More
$59.99 rl.
Chevelle Exhaust Headers, Big Block, Shorty Style, For Cars With Automatic Or Manual Transmission & Without Air Conditioning, 1964-1967 Part # 631072
Replacement Exhaust Headers Will Not Fit Saginaw Close Ratio 825 Power Steering Box Big Block Frame Stands And Motor Mounts Must Be Used To Insure Proper Engine Location And Header Fit Will Not Fit Column Shift Cars Fantastic Performance Upgrade Headers Are Available In High Luster Ceramic Coating Or Non-Coated Mild Steel Ceramic Coating Option Protects & Extends The Life Of Headers By Creating A Thermal Barrier That Significantly Lowers Under Hood Temperatures & Protects The Substrate Metal From Thermal Fatigue Header Includes All The Necessary Mounting Hardware, Collector Reducers Or Connector Pipes, Premium Gaskets & Detailed Installation Instruction Sheets Included Gaskets Are Rated Up To 1100ºF, Pressures To 3700 psig & Are Designed For An Exact Port Match With Doug’s Headers Headers Utilize 3/8” Flanges & 14 Gauge Tubing Shorty Design For Maximum Ground Clearance 1-3/4 Tube Size 3” Collector Size These Chevelle replacement exhaust headers have been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Chevelle. You will also be pleased to know that Eckler's has sourced these exhaust headers among other possible parts as the best choice for your repair or restoration project. Learn More
$573.99 Set
Chevelle Exhaust Headers, Big Block, For Cars With Automatic Or Manual Transmission, 1965-1972 Part # 631064
Replacement Exhaust Headers Will Not Fit Saginaw Close Ratio 825 Power Steering Box Big Block Frame Stands And Motor Mounts Must Be Used To Insure Proper Engine Location And Header Fit Does Not Fit With Power Glide Or Manual Transmission Cars Fantastic Performance Upgrade Headers Are Available In High Luster Ceramic Coating Or Non-Coated Mild Steel Ceramic Coating Option Protects & Extends The Life Of Headers By Creating A Thermal Barrier That Significantly Lowers Under Hood Temperatures & Protects The Substrate Metal From Thermal Fatigue Header Includes All The Necessary Mounting Hardware, Collector Reducers Or Connector Pipes, Premium Gaskets & Detailed Installation Instruction Sheets Included Gaskets Are Rated Up To 1100ºF, Pressures To 3700 psig & Are Designed For An Exact Port Match With Doug’s Headers Headers Utilize 3/8” Flanges & 14 Gauge Tubing 4-Tube Full Length Headers Are Typically Used For Higher RPM Horsepower, But Can Also Increase The Mid Range Torque 1-3/4” Tube Size 3” Collector Size These Chevelle replacement exhaust headers have been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Chevelle. You will also be pleased to know that Eckler's has sourced these exhaust headers among other possible parts as the best choice for your repair or restoration project. Learn More
$511.99 Set
Chevelle Exhaust System, Dual, Small Block, For Cars With Original Exhaust Manifolds, 1968-1972 Part # 630428
Reproduction Of Original Aluminized For Maximum Life Span Fits Cars With Original Exhaust Manifolds (No Headers) Includes Exhaust Pipes, & Mufflers Requires Mounting Kit P/N 630431 This Chevelle reproduction aluminized exhaust system has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction aluminized exhaust system from Eckler's will add authenticity and value to your Chevelle. Learn More
$374.99 Kit
| Items 1 to 28 of 71 total | Page: | Show per page |
| View as: Grid List | Sort by |
