Product Experts Available 1-800-359-8581

Filter Your Result

  1. Remove This Item Category: Engine and Related
  2. Remove This Item Category: Air Intake
CATEGORY
  1. Air Induction Systems (40)
  2. Air Intake Ducts and Related (6)
  3. Air Intake Hoses (2)
  4. Air Intake Valve (2)
  5. Intake Manifold and Gaskets (403)
  6. Throttle Bodies (11)
  7. Throttle Body Air Foils (1)
BRAND
  1. (3)
  2. (1)
  3. (392)
  4. (32)
  5. (1)
PRICE RANGE
  1. (5)
  2. (31)
  3. (30)
  4. (42)
  5. (338)
  6. (8)
 

1968 CHEVY AIR INTAKE

Search Term: 'All Parts'
Category: 'Air Intake'
Vehicle: '1968 CHEVY'
Items 1 to 24 of 454 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next Page
Grid  List 
1964-1972 Chevelle Carburetor Base & Air Horn Gasket Set, Holley 4-Barrel Part # 50-207815-1
Correct Holley Base Gasket And Air Horn Gasket   This Chevelle reproduction Holley carburetor base and air horn gasket has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction Holley carburetor base and air horn gasket from Eckler's will add authenticity and value to your Chevelle. Learn More
$8.99 ea.
Atomic EFI 2, Fuel Injection Conversion, Master Kit With Inline Fuel Pump Part # 50-347738-1
Converts Your Carburetor To Speed Density Fuel Injection In One Day Retains Your Air Cleaner, Distributor, Linkage, & Requires No Hood Modifications Cannot Be Used On Factory Computer Controlled Vehicles Compatible With Up To 15% Ethanol Blend Fuels & E85  Fuels  Eliminates Drivability, Cold Start, Sputtering, Coughing, & Stalling Issues Vastly Improves Drivability, Efficiency, & Performance Self Tunes With No Laptop Or Internet Connection Required Complete System Includes Everything You Need Supports Return And Returnless Fuel Pump Systems Made In The USA 1-Year Limited Manufacturer's Warranty Your classic vehicle is likely to be equipped with a carburetor. With millions on the road, carburetors "can" work great. If you drive your carbureted vehicle, you're familiar with the issues that come with it. Drivability is not great in cold weather or when driving in high elevations. They can cough, sputter, and even stall which, can be dangerous. And, they are prone to carboning up which leads to even more problems. Often, a re-tune can solve your problem for a little while but good luck finding someone who "knows" how to tune your carburetor right!  And, the tune can even change over time requiring another re-tune.  The all-new MSD Atomic EFI master kit was designed to solve all of the problems. In a matter of hours, you can have modern fuel injection technology and solve your carburetor drivability and reliability issues once and for all. The system works with all 4150 style 4-barrel square bore intake manifolds. You'll be able to retain your throttle linkage and kick down linkage (if automatic equipped), air cleaner system, and your mechanical or electronic distributor.  Installation takes approximately 1-day with basic hand tools. Once installed, the initial tuning setup takes only 5 minutes...just answer six simple questions and you'll be up and running! It's compatible with today's ethanol fuel blends. You can even electronically control your timing curve (see TIMING CONTROL REQUIREMENTS below)/ MSD's Atomic EFI system includes everything you need including a cast aluminum 1000 cfm EFI throttle body with exclusive annular booster rings for perfect fuel atomization, 1.75" throttle inlets with roller bearings for smooth pedal transition, integrated leak proof fuel rails, an integrated ECU with sensors (self calibrating TPS, 2-Bar MAP, IAT, WB02, & Fuel Pressure), fuel based rev limiter, high quality pre-terminated wiring harness with only 8 connections, 4 precision 80lb./hour injectors with stainless ball & seat metering, power module (with wideband oxygen sensor), a hand held tuner with removable 4GB (gigabyte) micro SD card so you can record and store valuable engine data, a high volume inline fuel pump system with 15 ft. of 3/8" rubber fuel line and fuel filter, and detailed illustrated step-by-step instructions.  The MSD Atomic EFI system supports engines up to 525 horsepower (at the crank) and works on engines from 100 cubic inches to 800 cubic inches.  The MSD Atomic EFI system works with blow through and draw through forced induction (turbo or superchargers) producing up to 14 psi (blow through or draw through).  And, it works with Wet nitrous oxide systems.  The MSD Atomic EFI includes boost / nitrous timing retard which will retard the timing when under boost or your nitrous is active (this feature works when the MSD Atomic EFI is setup to control the timing).  The MSD Atomic EFI will transform your vehicle with night and day better drivability, crisp instant throttle response, significantly improved efficiency, and of course, more power. Trust Eckler's for all your restoration, accessory, and performance parts needs. NOTES & WARNINGS: C.A.R.B. 50-STATE LEGAL:  The Atomic Throttle Body EFI system, PN 2900, has been granted Executive Order number D-722 from the California Air Resources Board. This E.O. number permits the installation of the Atomic TBI system on 1987 and older GM passenger cars and trucks with a V8 gasoline powered engine originally equipped with a carburetor. Other vehicles and manufacturers are pending approval. For emission compliant installation, all of the original control components must be retained including the catalytic converter, EST distributor, AIR pump, EGR, etc. An addendum outlining specific installation steps and settings for a CARB compliant installation are included separately with this kit.  COMPATIBILITY:Not compatible with engines over 800 cubic inches, distributors that produce hall-effect 5V signal, engines producing over 525HP at the crank, DRY nitrous oxide systems, forced induction systems producing more than 14 psi.  Injectors sizes are fixed and cannot be changed. TIMING CONTROL REQUIREMENTS:  MSD recommends that those who wish to use the Atomic’s timing control feature first get the engine to run without timing control. Splitting the timing control into a secondary process will add very little time to the total install, but could significantly help with trouble shooting, should it be needed.The following are a list of items that are required to use the timing features of the Atomic system: An MSD Ignition control (such as a 6A or 6AL Ignition) The distributor must be locked-out (instructions included with Atomic EFI) An adjustable distributor rotor to achieve accurate rotor phasing. The balancer must be degreed or use timing tape on your balancer. A timing light. EXHAUST AIR LEAKS:  The Atomic EFI is extremely sensitive to air leaks in the exhaust system. Any air leak between the engine and the WBO2 will cause the Atomic to have false readings, which can lead to poor engine performance, misfires, and an inability to properly auto-tune. Extended running of the Atomic EFI with an exhaust leak can result in detonation and severe engine damage. Improper installation of the oxygen sensor, and any damage that may result from such an installation, is not covered by the manufacturer’s warranty. WARNINGS: MSD’s included Push-Lock fittings are designed for use with the MSD fuel hose only. Do not use the MSD fuel hose with other fittings. Do not use MSD Push-Lock fittings with other fuel hose. Compatibility issues may cause fuel leaks. Learn More
$1,249.99 ea.
Comp Cams EZ EFI 2.0, Master Kit With In-Tank Fuel Pump Part # 50-348385-1
Converts Your Carburetor To Speed Density Fuel Injection In One Day Retains Your Air Cleaner, Distributor, Linkage, & Requires No Hood Modifications Cannot Be Used On Factory Computer Controlled Vehicles Eliminates Drivability, Cold Start, Sputtering, Coughing, & Stalling Issues Vastly Improves Drivability, Efficiency, & Performance Self Tunes With No Laptop Or Internet Connection Required 8-injector Throttle Body Supports Stock To 1200 HP Engines Holley Carb-Style Throttle Linkage & 4150 Square Bolt Pattern Walbro 450 LPH Pump Is Automatically Cooled By Fuel In The Tank Advanced Color Touch Screen Hand-Held/Sensor Dash W/Suction-Cup Mount - Same Mounting Points As Garmin GPS Exclusive Fuel Pulse Damper Creates Precise Fuel Control - Return Or Returnless-Style Fuel Systems Supported Works With Standard Distributors Or FAST&trade Distributors For Plug And Play Electronic Timing Control High-Quality Wiring Harness With Mesh Loom & Wide-Band O2 Has The Fewest Connections On The Market ECU Includes On-Board LED Diagnostics & EZ-Test&trade Indicator Lights Compatible With Standard, Ethanol Blend, & E85 Fuels Complete System Includes Everything You Need Made In The USA Lifetime Limited Manufacturer's Warranty Your classic vehicle is likely to be equipped with a carburetor. With millions on the road, carburetors "can" work great. If you drive your carbureted vehicle, you're familiar with the issues that come with it. Drivability is not great in cold weather or when driving in high elevations. They can cough, sputter, and even stall which, can be dangerous. And, they are prone to carboning up which leads to even more problems. Often, a re-tune can solve your problem for a little while but good luck finding someone who "knows" how to tune your carburetor right!  And, the tune can even change over time requiring another re-tune.  Step up to Comp Cams Fast EZ EFI® 2.0 and solve your carebureator woes once and for all.  The next generation of the revolutionary self tuning maintains ease-of-use that doesn't require a laptop or tuning experience. Simply hook up the system, answer the Setup Wizard questions on the hand-held, and EZ-EFI 2.0® tunes itself as you drive. Its eight-injector, die cast throttle body features OEM late model sensors for accuracy, durability, and availability at virtually any auto parts store won't leave you stranded.  The system supports up to 1200 horsepower (the highest on the market) so it grows with future modifications. It works with virtually any distributor and optional timing control is available.  A new secondary shaft throttle stop adjustment provides even more precise idle airflow adjustment and balance. An industry exclusive integrated fuel pulse damper creates ultra-precise fuel control. The EZ-EFI 2.0® also incorporates needle-bearing supported shafts instead of bushings and an integrated fuel rail design with crossover for tighter packaging. Setup includes the market's fewest connection wires, including a new high-quality wiring harness and a sleek mesh-type loom. The EZ-EFI 2.0® fetures the industry’s first color touchscreen on a hand held tuner. Self-powered through the ECU rather than requiring an outside power source, it shares the same mounting points as the Garmin Nuvi GPS, meaning there are nearly limitless mounting options (suction cup mount is included). Serving as the Setup Wizard initially, it then becomes an electronic gauge screen. The hand-held has various advanced features including screen hide sleep function, expanded diagnostics and data screens, plus intuitive navigation. Electronic fuel pressure measurement is standard on all kits, and all kits work with a wet nitrous system, providing built-in nitrous timing retard and special nitrous AFR targeting. EZ-Ignition™ features an EZ-Solution™ option, meaning that it is plug-and-play with FAST™ Distributors for electronic timing control or can be used with an EFI distributor of your choice and a FAST™ Crank Trigger. Or the system can be used to control fuel only and be used with a standard carb-type distributor (Ex. HEI) where timing is set manually. NOTES:  NOT compatible with resistor spark plugs or solid core spark plug wires.  Requires adapter or a new intake manifold if your existing manifold is not equipped with a square carburetor mounting flange.  The EZ-EFI® throttle body provides two 3/8 and one 1/8 manifold vacuum ports and one 1/8 ported vacuum port. (Ported vacuum ports do not provide a vacuum signal at idle.) If the carburetor being removed from your vehicle utilized more than this number of ports, you may require a barbed T fitting of the appropriate size to multiply the number of ports available on the EZ throttle body.  You will need a 2" hole saw (not included) if you elect to mount the wiring harness through the firewall and mount the ECM in your interior.  A 2" firewall grommet is included for this purpose.  The main battery wires, labeled “BATTERY POS” and “BATTERY NEG” MUST BE CONNECTED DIRECTLY to the battery. Connecting them anywhere else invites problems with electrical noise. These kinds of problems are difficult to diagnose. The wires may be extended if needed using automotive grade 10 gauge (or larger) wire.  CAUTION:  Installation of this product requires detailed knowledge of automotive systems and repair procedures. Installation of fuel system parts and any fuel tank modifications must be carried out by a qualified automotive technician. Installation of fuel system parts requires handling of gasoline. Ensure that work is performed in a well-ventilated area with an approved fire extinguisher nearby. Extinguish all open flames, prohibit smoking and eliminate all sources of ignition in the area of the vehicle before proceeding with the installation. When working with fuel systems, eye goggles and other safety apparel should be worn as needed to protect against debris and sprayed gasoline. The finished work must be checked carefully to ensure there are no fuel leaks. All fuel lines and connectors used in the installation of your fuel injection system should be rated for the higher pressure associated with fuel injection systems. It is not recommended that you use the factory hard lines as part of your installation unless the ends allow for the proper connection to high pressure systems. Be mindful as you route your fuel hoses that you keep them away from sources of heat and moving components on your vehicle. Learn More
$3,575.99 ea.
Ultimate LS Fuel Injection Kit for LS1/LS2/LS6 - 500HP w/o Trans. Control | FiTech - 70001 Part # 50-389090-1
The Fastest AND Easiest Way  To Get Your New Or Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Works With  All 1997-2004 LS1/LS6 and 2005-2007 LS2 Engines Supports Engines Up To 500 HP, Naturally Aspirated (Non-Forced Induction) NOTE:  MUST Use Factory Coil Pack Sub-Harness.  Does NOT Include Automatic Transmission Control (See P/N 389119) SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  92MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched 36 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS1, LS6, LS2 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Transmission Control:  No (Available With Different Model - 70002) Compatible With Superchargers, Turbo, Nitrous:  No (Available With Different Model - 70003 750HP w/o Trans. Control or 70004 750HP w/Trans. Control) What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Wide Band Controlled O2 Sensor (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On), 1 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$1,614.99 Kit
Ultimate LS Fuel Injection Kit for LS1/LS2/LS6 - 500HP With Trans. Control | FiTech - 70002 Part # 50-389119-1
The Fastest AND Easiest Way  To Get Your  New Or Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Built-In Transmission Control For GM 4L60, 4L65, 4L70, or 4L80 Automatic Transmissions Works With  All 1997-2004 LS1/LS6 and 2005-2007 LS2 Engines Supports Up To 500HP, Naturally Aspirated (Non-Forced Induction) NOTE:  MUST Use Factory Coil Pack Sub-Harness SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  92MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched 36 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS1, LS6, LS2 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Transmission Control:    Included, Works With 4L60, 4L65, 4L70, or 4L80 G.M. Transmissions Compatible With Superchargers, Turbo, Nitrous:  No (Available With Different Model - 70004 750HP w/Trans. Control) What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Wide Band Controlled O2 Sensor (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On), 1 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount, Installation Instructions Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$1,885.99 Kit
Ultimate LS Fuel Injection Kit for LS1/LS2/LS6 - 750HP w/o Trans. Control | FiTech - 70003 Part # 50-389120-1
The Fastest AND Easiest Way  To Get Your  New Or Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Works With  All 1997-2004 LS1/LS6 and 2005-2007 LS2 Engines Supports Engines Up To 750 HP (Including Supercharged, Turbocharged, & Nitrous) NOTE:  MUST Use Factory Coil Pack Sub-Harness.  Does NOT Include Automatic Transmission Control SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  102MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched  66 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS1, LS6, LS2 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Knock Sensor Control:  Yes O2 Sensor Control:  Yes, Dual Bosch Wide Band With Dual Trim Control (Self Learning) Transmission Control:  No (Available With Different Model - 70004) Compatible With Supercharger, Turbo, Nitrous:  Yes MAP Sensor:  3 Bar, Automatically Detects Up To 30 PSI Boost What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Dual Wide Band Controlled O2 Sensor With Dual Trim Control  (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On), 3 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$1,885.99 Kit
Ultimate LS Fuel Injection Kit for LS1/LS2/LS6 - 750HP With Trans. Control | FiTech - 70004 Part # 50-389121-1
The Fastest AND Easiest Way  To Get Your  New Or Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Works With  All 1997-2004 LS1/LS6 and 2005-2007 LS2 Engines Supports Engines Up To 750 HP  (including Supercharged, Turbocharged, & Nitrous) Includes Transmission Control For 4L60, 4L65, 4L70, or 4L80 G.M. transmissions NOTE:  MUST Use Factory Coil Pack Sub-Harness.  SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  102MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched  66 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS1, LS6, LS2 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Knock Sensor Control:  Yes O2 Sensor Control:  Yes, Dual Bosch Wide Band With Dual Trim Control (Self Learning) Transmission Control:  No (Available With Different Model - 70004) Compatible With Supercharger, Turbo, Nitrous:  Yes MAP Sensor:  3 Bar, Automatically Detects Up To 30 PSI Boost What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Dual Wide Band Controlled O2 Sensor With Dual Trim Control  (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On),  3 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$2,154.99 Kit
Ultimate LS Fuel Injection Kit for LS3/L92 - 500HP w/o Trans. Control | FiTech - 70011 Part # 50-389142-1
The Fastest AND Easiest Way  To Get Your  New Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Works With  All LS3 Engines 2008-2013 & L92 Engines (2007-2013) Supports Engines Up To 500 HP, Naturally Aspirated (Non-Forced Induction) NOTE:  MUST Use Factory Coil Pack Sub-Harness.  Does NOT Include Automatic Transmission Control SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  92MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched 36 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS3 & L92 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Transmission Control:  No (Available With Different Model - 70012 & 70014) Compatible With Superchargers, Turbo, Nitrous:  No (Available With Different Model -  7013 750HP w/o Trans. Control or 70014 750HP w/Trans. Control) What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Wide Band Controlled O2 Sensor (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On), 1 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$1,614.99 Kit
Ultimate LS Fuel Injection Kit for LS3/L92 - 500HP With Trans. Control | FiTech - 70012 Part # 50-389143-1
The Fastest AND Easiest Way  To Get Your  New  Or Pre-Owned  LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Built-In Transmission Control For GM 4L60, 4L65, 4L70, or 4L80 Automatic Transmissions Works With  All 2008-2013 LS3 & 2007-2013 L92 Supports Up To 500HP, Naturally Aspirated (Non-Forced Induction) NOTE:  MUST Use Factory Coil Pack Sub-Harness SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  92MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched 36 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS3 & L92 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Transmission Control:    Included, Works With 4L60, 4L65, 4L70, or 4L80 G.M. Transmissions Compatible With Superchargers, Turbo, Nitrous:  No (Available With Different Model - 70014 750HP w/Trans. Control) What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Wide Band Controlled O2 Sensor (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On), 1 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount, Installation Instructions Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$1,885.99 Kit
Ultimate LS Fuel Injection Kit for LS3/L92 - 750HP w/o Trans. Control | FiTech - 70013 Part # 50-389144-1
The Fastest AND Easiest Way  To Get Your  New Or Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Works With  All 2008-2013 LS3 Engines & 2007-2013 L92 Engines Supports Engines Up To 750 HP (Including Supercharged, Turbocharged, & Nitrous) NOTE:  MUST Use Factory Coil Pack Sub-Harness.  Does NOT Include Automatic Transmission Control SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  102MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched  66 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS3 & L92 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Knock Sensor Control:  Yes O2 Sensor Control:  Yes, Dual Bosch Wide Band With Dual Trim Control (Self Learning) Transmission Control:  No (Available With Different Model - 70014) Compatible With Supercharger, Turbo, Nitrous:  Yes MAP Sensor:  3 Bar, Automatically Detects Up To 30 PSI Boost What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Dual Wide Band Controlled O2 Sensor With Dual Trim Control  (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On), 3 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$1,885.99 Kit
Ultimate LS Kit for LS3/L92 - 750HP With Trans. Control | FiTech - 70014 Part # 50-389145-1
The Fastest AND Easiest Way  To Get Your  New Or Pull Out LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Works With  All  2008-2013 LS3  Engines & 2007-2013 L92 Engines Supports Engines Up To 750 HP  (including Supercharged, Turbocharged, & Nitrous) Includes Transmission Control For 4L60, 4L65, 4L70, or 4L80 G.M. transmissions NOTE:  MUST Use Factory Coil Pack Sub-Harness.  SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  102MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched  66 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS1, LS6, LS2 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Knock Sensor Control:  Yes O2 Sensor Control:  Yes, Dual Bosch Wide Band With Dual Trim Control (Self Learning) Transmission Control:  No (Available With Different Model - 70004) Compatible With Supercharger, Turbo, Nitrous:  Yes MAP Sensor:  3 Bar, Automatically Detects Up To 30 PSI Boost What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Dual Wide Band Controlled O2 Sensor With Dual Trim Control  (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On),  3 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$2,154.99 Kit
Edelbrock, LS Intake Manifold kit Part # 50-281008-1
Affordable  & Trouble Free Solution For Running A Late Model Motor Made In USA Solid State Electronics 1,500-6,500 Operating RPM  Range Dual Plane Intake Style Natural Aluminum Intake Finish Dual Pattern Carburetor Flange (Square Or Spread Bore) Uses Factory GM Sensors & Coils (Not Included) Works With 24x Crank Sensors Only (Pre 2006 GM V8) Eckler's offers this LS intake manifold kit, manfactured by Edelbrock, for your Chevelle. This kit, developed by MSD & Edelbrock, will let you use any Vortec 4.8, 5.3, 6.0, or LS1 / LS6 (1997-2004). The smaller 4.8 & 5.3 are plentiful and very affordable in salvage yards due to the complexity of the computer and wiring. All you need with this kit is a carburetor, and the factory sensors and coil packs from the donor vehicle. The Edelbrock / MSD ignition controller plugs into the factory sensors and coil packs and handles all computer tasks, while the carburetor does the fuel. The controller comes with 6 pre-set spark curves which will let you run whatever octane fuel you desire in your F-Body. Brackets are included to mount TH350 & 700R4 Detent/Kickdown Cables. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits. Learn More
$784.99 ea.
1967-69 Chevelle Intake Manifold Bolt Set,Iron, SB Part # 50-180331-1
Technically correct original GM intake manifold bolt set with correct head markings and plating. Learn More
$50.99 Set
1967-1969 Chevelle Intake Manifold Bolt Set, Cast Iron, Big Block Part # 50-180332-1
Technically correct US made faithful reproduction intake manifold bolt set with correct head markings and plating.  Always trust Rick's Camaro for all your performance, accessory, and restoration needs! Learn More
$26.99 Set
1964-86 Chevelle Edelbrock 2016 Manifold & Carb Kit, C-357 Manifold With 3 X 2 Carburetors,262-400 C.I.D Small Block V8 With Vortec Heads Part # 50-396378-1
MANIFOLD/CARB KIT C-357 Manifold with 3 X 2 Carburetors Chevrolet 1955-86 Small Block Due to popular demand... we are now offering street rodders the ultimate solution for adding dual, triple or six deuce Edelbrock power! Edelbrock Vintage Manifold and Carb kits offer you the core components you need to install an Edelbrock multiple carburetor and intake manifold setup on your small-block Chevy, Small-block or Flathead Ford - All in one box. They include a new Edelbrock Intake Manifold with two, three or six of our new Edelbrock 94 carburetors. To make the installation simple, these kits include straight throttle linkage and triple-deuce kits include our exclusive progressive throttle linkage #1033 originally designed by Vic Edelbrock Sr. back in the late 1950's for small-block Chevy. All kits aLSo include high-quality Edelbrock gaskets, carb studs and all of the necessary hardware for a hassle free installation. Learn More
$1,527.99 ea.
Chevy Edelbrock 2069 Dual Quad Kit Perf Rpm 409 "W" Lg Port Part # 50-397609-1
A huge hit among street rodders, these Dual-Quad Kits offer the ultimate set-up for anyone who wants the look and the performance of dual-quad carbs. They include an Edelbrock RPM or RPM Air-Gap Dual-Quad intake manifold and two 500 cfm Thunder Series AV. Learn More
$1,422.99 ea.
Edelbrock 93781 Valve; Intake; 348/409 W-Series Bbc (60809/60819) Set Of 8 Valves Part # 50-398601-1
Valve Intake 348/409 W-Series Bbc (60809/60819) Set Of 8 Valves 1-piece, swirl-polished, hardened tip stainless steel exhaust valves with undercut stems for increased flow. Hard-chromed valve stems are 11/32in. except where noted Learn More
$133.99 ea.
Edelbrock 8515 Bolt Kit Chevy Ls/Ls2 Intake Manifold Part # 50-398588-1
Reduced Hex Heads For Easy Wrench AccessCadmium Finished Steel Bolt And Hardened WashersChevrolet LS1-LS2 I Designed specifically for Edelbrock manifolds, these bolt kits feature reduced hex heads for easy wrench access. Features include CADmium finished steel bolt and hardened washers. Learn More
$18.99 ea.
Edelbrock 20294 Manifold And Carb Kit. Performer Rpm. Air-Gap. Small Block Chevrolet. Vortec. En Part # 50-399117-1
Small Block Chevy with Vortec/E-Tec Heads800cfm Thunder Series AVS CarburetorRPM Air-Gap Intake ManifoldEnduraShine Finish Chamber Size 110cc; Complete; Single; 454-O; Street Legal; Polished; 50 State Legal~ Has a California Air Resources Board (C.A.R.B.) Executive Order E.O. Number~ Meets The Emission Standard For Use On Pollution Controlled Vehicle~ 50 State Legal For The Vehicles Listed On The E.O.~ To Review OR download E.O. For Your Application Visit www.edelbrock.com/eo. Learn More
$1,059.99 ea.
1966-1972 Chevelle Edelbrock 20614 Manifold and Carb Kit. Performer. Big Block Chevy. Oval Port. EnduraShine Part # 50-399120-1
For Oval Port Performer w/Thunder AVS 800 cfm Carb Includes Manifold/Electric Choke/Carb/Fuel Line/Gasgacinch/Intake Bolts/Gaskets Endurashine Finish Chamber Size 60cc; Single; 1.90" Intake Valves; Polished; Complete Learn More
$1,014.99 ea.
1966-1972 Chevelle Edelbrock 20624 Manifold and Carb Kit. Performer RPM. Big Block Chevy. Oval Port. EnduraShine Part # 50-399123-1
Single-Quad Manifold And Carb Kit For Oval Port Performer RPM w/Thunder AVS 800 cfm CarbIncl. Manifold/Elec. Choke/Carb/Fuel Line/Gasgacinch/Intake Bolts/GasketsEndurashined Chamber Size 60cc; Single; 2.02" Intake Valves; Polished; Complete Learn More
$1,121.99 ea.
1966-1975 Chevelle Edelbrock 20634 Manifold and Carb Kit. Performer RPM. Air-Gap. Big Block Chevy. Oval Port. Part # 50-399129-1
For Oval Port Performer RPM AirGap w/Thunder AVS 800 cfm Carb Includes Manifold/Electric Choke/Carb/Fuel Line/Intake Bolts/Gaskets Endurashine Finish Chamber Size 70cc; Complete; Single; Straight Plugs; Polished; Chevy 302/327/350/400; Up To 1986; Must Use Hardened Pushrods; Street Legal Learn More
$1,050.99 ea.
Edelbrock 20284 Manifold And Carb Kit. Performer Rpm. Small Block Chevrolet. Vortec. Endurashine Part # 50-399221-1
Small Block Chevy with Vortec/E-Tec HeadsPerformer RPM Intake ManifoldEnduraShine Finish800cfm Thunder Series AVS Carburetor Cylinder Head; Chamber Size 110cc; Complete; Single; Oval Port; Incl. Springs For Hydraulic Rollers; Street Legal; Polished;; 50 State Legal~ Has a California Air Resources Board (C.A.R.B.) Executive Order E.O. Number~ Meets The Emission Standard For Use On Pollution Controlled Vehicle~ 50 State Legal For The Vehicles Listed On The E.O.~ To Review OR download E.O. For Your Application Visit www.edelbrock.com/eo. Learn More
$978.99 ea.
1966-1975 Chevelle Edelbrock 20644 Manifold and Carb Kit. Performer RPM. Air-Gap. Big Block Chevy. Rectangular Part # 50-399222-1
For Rectangular Port Performer RPM AirGap w/ThunderAVS 800 cfm Carb Includes Manifold/Electric Choke/Carb/Fuel Line/Intake Bolts/Gaskets Endurashine Finish Cylinder Head; Chamber Size 64cc; Complete; Single; Chevy 302/327/350/400; Up To 1986; Must Use Hardened Pushrods; Street Legal; Polished; COMPLETE Learn More
$1,061.99 ea.
Items 1 to 24 of 454 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next Page
Grid  List